Direct detection of an exoplanet (a planet outside our solar system) that is orbiting a star requires the stellar light to be dimmed as much as possible. This is due to the huge contrast in brightness (106–10) between the parent star and its orbiting planet, as well as the small angular separation (10−6 rd) between the two objects. In the mid-infrared, one way to image the planet against the background light of the star is by nulling interferometry, which uses at least two telescopes coherently recombined in the way proposed by Bracewell1, so that the brighter light from the star is cancelled out by light wave interference, hopefully allowing the orbiting planet to be seen. When a phase shift is applied to one of the arms of the telescope, a system of fringes with a central dark fringe is projected onto the sky. The star image, put on the dark fringe, is strongly attenuated, while the planet, if on a bright fringe, can be detected. Obtaining a phase shift that brings different wavelengths to focus together (is achromatic) is mandatory because the wavelength domain where spectroscopic life signatures are to be found is broad2 (typically 6-18 μm), and it’s a photon-starving experiment. Various methods3 have been presented in order to approach an achromatic phase shift in a large domain of wavelength. Unfortunately, they typically make the two arms of the interferometer asymmetrical and introduce several additional optical components with sometimes a delicate adjustment. A new solution4,5 has then been proposed, using a twin mirror made of cells of different thicknesses transposed as a chessboard pattern. It is the peculiar distribution of the cells’ thickness that makes the phase shift quasi-achromatic on a broad domain.
The Pascal’s triangle solution provides the distribution in z of the cells, but it does not say anything on the distribution of cells in x and y (on the surface of the mirrors). A distribution has been found which is built according to a recursive scheme, also based on diophantine relations, and which is optimum in terms of darkening the residual point spread function of the star image. Figure 2 shows the resulting pattern for the pair of mirrors (odd and even) when n=5. Click on the image to enlarge it
Performances : A simulator was developed, based on a fully analytical solution to predict the performance of the configurations.
Conclusion This approach presents several advantages: a very compact and robust system, a fully symmetric design with respect to the two arms of the interferometer, and finally the concept can be extended to multi-telescope interferometers with a phase shift other than π. The use, in the future, of adaptive segmented mirrors based on micro optical electro mechanical systems (MOEMS) technology, could allow adjustment of the wavelength and a fine correction of error that would be beneficial to future exoplanet detection programs.
Last update on 21 December 2021